Snappi Diaper Fasteners
The products in this category are sold out right now. Please check back soon.
What Is a Snappi?
A Snappi is a small, Y/T-shaped fastener made of stretchy material with three gripping surfaces, one at each end. The little plastic teeth grab onto the knit or woven fabric of the diaper, and the elastic holds the diaper snugly and flexibly closed around your baby: the two upper arms grip the diaper's corners at the hips, and the bottom arm holds the front in place. The result is a closure that holds as firmly as a pin but goes on and comes off in a couple of seconds, and that moves with your baby instead of pulling tight.
The invention comes from South Africa, where in the 1980s a father got tired of the safety pin's two obvious problems: it is slow, and it is sharp, a poor combination with a wriggling baby on the changing table. His solution quickly became the worldwide standard, and today the Snappi is the natural accessory wherever flat diapers, tie-on diapers, and prefolds are used. The original has been refined in materials and design since, but the basic idea is the same, because it simply cannot be improved on.
Why the Snappi Beats the Safety Pin
- Safety: No sharp parts near your baby. The gripping teeth are tiny and face into the fabric, so they cannot poke or prick.
- Speed: A diaper change with a Snappi takes about as long as with a modern hook-and-loop diaper: fold, stretch, click, done.
- Elastic fit: Where a pin locks the diaper in one position, the Snappi's elastic gives with your baby's belly during movement, meals, and sleep. The diaper stays snug without squeezing.
- One hand free: With a little practice, you can put on a Snappi with one hand while the other keeps a wriggler in place.
How to Use a Snappi
- Fold the diaper around your baby, whether it is a prefold in an angel fold, a flat diaper folded in a triangle, or a tie-on diaper where you want extra security.
- Stretch the Snappi slightly before placing it. The elastic should work for you.
- Place the two upper arms into the diaper fabric at your baby's hips with a small downward hooking motion so the teeth grip well.
- Pull the bottom arm down and attach it to the center of the diaper front.
- Check the grip with a gentle tug, and put the diaper cover or wool cover on over it. The Snappi should always be covered so it cannot catch on clothing or curious fingers.
A good tip: the Snappi grips best on fabric with a bit of texture. Terry, knit, and woven cotton are perfect. Very smooth or tightly woven fabrics give less grip, so test with a tug the first time you use it on a new type of diaper.
Sizes and Lifespan
Snappis come in two sizes: size 1 for newborns and smaller diapers, and size 2 with longer arms for bigger children, heavily stuffed nighttime diapers, and large flat diapers. The elastic is built for daily use throughout the diapering years, but like all elastic it has a lifespan: do not expose it to high temperatures (it should not go in a boil wash or the dryer), stretch it lightly before use, and replace it if the material starts to crack. With 2-3 Snappis in rotation, one in use, one at the changing table, and one in the diaper bag, you are always covered, and the price is low enough that it is the cheapest insurance in the whole diapering system.
Snappi in the Classic Diapering System
The Snappi is the little piece that makes the classic, economical diapering system work in a modern daily routine. The combination looks like this:
- Absorbency: Prefolds or flat diapers, the cheapest, fastest-drying, and most flexible absorbency there is.
- Closure: The Snappi holds the fold in place so the diaper sits snugly around legs and waist, which used to require pins and patience.
- Waterproof layer: A PUL cover or a wool diaper cover over the top.
The system is not just nostalgia: it is the most economical way to use cloth diapers at all, it dries faster than any modern system, and it fits every body shape, precisely because you fold the diaper to the baby rather than the other way around. The Snappi is what makes it practical in the 2020s.
Care and Safety
The Snappi needs minimal care: wipe it off or rinse it in lukewarm water as needed. It does not need machine washing, and high heat shortens the elastic's life. Keep it out of your baby's reach when not in use (the gripping teeth are harmless in the diaper under a cover, but they should not be a toy), and check it regularly for wear. Always use the Snappi under a cover, never as the outermost layer.
Frequently Asked Questions About Snappi
Can a Snappi hurt my baby?
No. The teeth are small, face into the fabric, and are always covered by a cover. Safety compared to the safety pin was the whole point of the invention.
Which diapers does the Snappi work on?
Any diaper with fabric to grip: prefolds, flat diapers, gauze diapers, and tie-on diapers. On very smooth fabrics the grip is weaker, so test with a tug.
Size 1 or size 2?
Size 1 covers the vast majority of needs from newborn onward. Choose size 2 for big kids, heavily stuffed nighttime diapers, and the largest flat diapers.
How many do I need?
2-3 in rotation is plenty: one in use, one at the changing table, and one in the bag.
Can the Snappi go in the washing machine?
It tolerates a low-temperature wash, but does best when simply wiped off. Avoid boil washing and the dryer, which wear out the elastic.
If you have questions about folding techniques or the classic diapering system, write to us and we will be happy to help you get started.