All Cloth Diaper Inserts
The products in this category are sold out right now. Please check back soon.
Buying Guide: How to Choose the Right Insert
The short answer: it depends on when the diaper will be used and how much your child wets. For daytime, many people prefer a thinner, fast-absorbing insert that does not add bulk between the legs, so your child can move freely. For overnight, it is all about maximum absorbency, and hemp and bamboo are hard to beat – ideally combined, so you get both quick uptake and large capacity.
A good rule of thumb is to keep several types of inserts at home and experiment for the first few weeks. Every child is different, and what holds up for the neighbor's baby may not suit yours. The beauty of a cloth diaper system is that you can adjust along the way without having to buy everything new.
Boosters – Extra Absorbency for the Long Haul
A booster is an extra insert that you lay on top of what is already in the diaper. It is the easiest way to turn an ordinary daytime diaper into a night diaper. Hemp is the classic choice here, because it absorbs a lot without adding much bulk. Some inserts have snaps so they can be folded and adjusted in height – you will find those among our snap-in inserts. Others are built as two-part solutions you can separate for faster drying – see our duo inserts, for example.
Stay-Dry and Fleece – a Dry Feel Against the Skin
Natural materials feel damp when they are wet – that is perfectly natural, and many children do not notice. But if your child is bothered by the feeling of wet skin, a stay-dry or fleece layer on top can make a big difference. Fleece does not absorb on its own, but it draws moisture down into the absorbent layers and keeps the skin drier – much like a sports T-shirt. It is also a natural fit on top of a microfiber insert, which must never lie directly against the skin.
How to Use Inserts in Different Diaper Types
How you use your insert depends on the diaper type. In a pocket diaper you stuff the insert into the pocket, so fabric sits between your child and the insert. In a cover/AI2 system you lay or snap the insert directly into the cover, which you can then use several times. And with fitted diapers and prefolds you can lay a booster on top for extra absorbency. If you want to dive deeper into the different systems and insert types, we have gathered everything under tie-on diapers, inserts & boosters.
Washing and Caring for Your Inserts
New natural-fiber inserts need to be washed several times before they absorb at their best. Cotton, hemp, and bamboo contain natural oils that only wash out after a few cycles, so a brand-new insert often does not absorb fully until it has been through the machine 4-6 times. That is completely normal, so do not worry if the first attempt does not last all night.
- As a starting point, wash at 60°C (140°F) together with your other diapers.
- Avoid fabric softener – it coats the fibers and reduces absorbency.
- Use only a small amount of detergent, and avoid soaps with lots of additives.
- Inserts can usually go in the dryer on low heat, but line or air drying extends their life – always check the individual care instructions.
How to Store Used Inserts
Store used inserts dry until you have enough for a wash. Most people use a diaper pail with a waterproof liner or a large wet bag that can hang by the changing table. When it is time to wash, toss everything – bag and inserts – straight into the machine. If you need bags for this, you will find a wide selection under our diaper bags and wet bags.
Inserts for Nursing and Menstruation
For us, the word 'inserts' covers more than just cloth diaper inserts. If you need nursing pads for the first weeks of leaking milk, you will find them under nursing pads. It is the same basic idea as with cloth diapers: reusable, soft, and skin-friendly alternatives to disposables – good for your skin, your wallet, and the environment.
Frequently Asked Questions About Cloth Diaper Inserts
How many inserts do I need?
It varies, but most families do well with 20-30 inserts in mixed materials, so there are always clean ones ready while others are in the wash. If you use a booster overnight, a couple of extra hemp inserts can be nice to have.
Which insert absorbs the most?
Hemp absorbs the most per layer, closely followed by bamboo. Cotton and microfiber absorb faster but have less total capacity. For overnight, a combination of a fast and a very absorbent material is often the best solution.
Why shouldn't microfiber touch the skin?
Microfiber absorbs so effectively that it can dry out your baby's skin and leave red marks if it lies directly against it. Always put a layer of cotton, bamboo, or fleece in between.
Why isn't my new insert absorbing?
Natural-fiber inserts need several washes before they reach full absorbency, because the natural oils in the fibers have to wash out first. Give them 4-6 washes before judging the absorbency.
Can I use the same insert in all my diapers?
Often yes. Many inserts are one-size or foldable, but the fit varies between brands. Check the measurements if you want to be sure the insert fits neatly in your particular cover or pocket diaper.